Brand New Jabsco Macerator Pump

about 3 years ago
Brand New Jabsco Macerator Pump
Aleutian Series
Available on
Cruiser Forum
Display Vendors by Map

Brand New Jabsco Macerator Pump, Model 18590, Defender price $169 asking $100 email me for more information
Jabsco Sealed Macerator Pumps provide the ideal solution for waste, fish box and livewell tank evacuation.
The Jabsco 18590 Series DC macerator pump unit is the ideal solution for emptying marine holding tanks when not in a discharge restricted area
Self priming to 5 feet this pump will empty a typical 30 gallon (115 Liter) holding tank in less than 3 minutes
Duty cycle of the pump is 15 minutes continuous which means a 180 gallon (680 liter) can be emptied in a single operation
It is recommended that holding tanks be flushed with several gallons of water after each pump outThis will reduce the possibility of a continued build up of sediment in the tank which could cause a potential blockage
The Jabsco Macerator Pump is the ideal pump for the emptying of fish box and livewell receptaclesVery often the livewell tank will be above the waterline of the boat, when this is the case gravity can be used to empty the livewell tank
If not installed in this format then it is beneficial to use the Jabsco macerator pump for evacuation due to its self-priming capabilities and also it's grinding properties
Fish boxes are typically mounted into the floor of the vessel and are very often below the waterline or only partially above the waterline
Again the Jabsco Macerator pump has the characteristics that lend themselves to this application
The bait residue particles of ice, fish scales and anything else that could potentially be found in the Fish-Box will be easily passed buy the Jabsco Macerator Pump, and the self priming capabilities are perfect for fish box installations common to many of today's sports fishing boats
Flow Rate: 12 GPM
Port Size: 1-1/2" inlet ( NPT and Hose Barb options) with 1" Hose Barb Outlet
Stainless steel 4-blade cutter reduces particle size to 1/8" max
New Nitrile compound flexible impeller
Lip-type seal
Self-priming pump with stainless steel wear plate
Fully enclosed, permanent magnet-type motor
Can run dry without damage
Meets ISO 8846 MARINE ignition protection standards
Dimensions: 11-9/16" L x 3-1/4" H x 4-11/16" W