2002 All-welded Alumacraft CC 16' Aluminum Flats/John Boat

over 4 years ago
2002 All-welded Alumacraft CC 16' Aluminum Flats/John Boat
Price
$6,500.00
Brand
Alumacraft
Seller
ninetoes
Available on
TheHullTruth
Description

Boat purchased new in 2002 with original Mercury 2002 50HP ELPTO. This boat has been meticulously maintained since new. Has been run with synthetic oil and Quickleen since new. No hour meter but has approximately 600 flawless hours. Stainless propeller, Top speed is 34.5mph by GPS. A lot of money has been put into customization with this boat. A custom anodized aluminum poling platform which is bolted and welded to the hull with fold up Hella running light and White LED lights mounted under the polling platform for night fishing. Each side of the gunnels has rod tubes for fly rods up to 10' long with 6 rod holders on the port side of the console. There is a small 10 gallon bait well in the console seat. Walk-around gunnels have been added and carpeted. Marine grade Plywood primed with epoxy and finished with Interlux nonskid was used for the deck. There are four access hatches in the deck all with recessed stainless steel hardware and stainless piano hinges. A 28 qt marine cooler is flush mounted into the deck. There are two 27 series batteries in the console and a new Interstate 24 series craking battery by the motor compartment. The trolling motor is a 2007 model 80lb thrust saltwater MinnKota Riptide.
The boat hull is a Alumacraft all welded hull with 0.102 aluminum. It has a 6 degree deadrise. There is a small basic Garmin depthfinder with temp, LED lights on the front and side of the console, and a new bilge pump.
The boat sits on a 2008 Long aluminum I-beam trailer with a 2,800lb capacity and a 1,800lb capacity winch with heavy duty strap. It is in very good shape and cost $2,200 when purchased new. The 13' tires are in very good shape as is the spare.
I am selling because I have a 1 year old and a 3 year old and already have a 26 Regulator..... Only have time for one. This is the best multipurpose flats/Bay/Utility/Duck boat made!!
Please PM me with questions.
$6,500