Nicest Schiada 10'r ever built! 19k

about 3 years ago
Nicest Schiada 10'r ever built! 19k
Bravado Industries
Available on
SFV/PARKER Posts 573

This is the absolute nicest 10' Schiada Hull on the planet! It literally is nicer then a new one (blue printed bottom etc..)
-Laid up inside out (add hull thickness so the boat rides better and you do not have to worry about bottom cracking like others)
-Custom Bulkhead installed (to attach a through bolted custom fuel cell / and install two 6.5 speakers)
-Rear Well removed / Flat Decked - Looks infinitely better and will allow for cleaner rigging.
-Outboard "notch" removed for easier installation of a custom stand off box
-Bottom Blue Printed by Islander Marine
-ReGelled complete from top to bottom by Islander marine - Custom Gel that CANNOT be done in the mold (can't get a spray gun up in the gunnel to do pin lines and multiple colors)
-Gel Coated internally like a flat bottom
-Custom Floor installed at Schiada
-Custom notch in the back of the floor to allow bildge pumps to lowest area of the boat
-Drain Plug hole filled and lowered to correct spot
-Custom Access Hatch underneath seat to service / inspect fin
-Stainless Steel Double Drop Through Fins by Racey Industries (one of a kind)
-New Flat Black RubRail installed
-CUSTOM INTERIOR done by Carlos at Premier Marine Interiors (regarded as the top interior guy in the country by many)
Over 9K in gel coat / Fiberglass work alone on this boat. I won't even get into what the rest of the stuff costs interior etc..
-40HP Tohatsu 3Cyl (freshly built by Amber Marine) motor makes 50HP with the weight of a 40HP (160lbs) Brand new wiring harness included also
-Custom (ridiculously custom) Slammed Tandom Trailer built by Mike Livingston (Of Ellis Trailer fame) at Schiada!
-Notched Frame (to make it lower)
-Full Suspension
-Frenched LED's throughout
-Floating Fenders (Old School Flat bottom look)
-Custom Wheels and tires
-Bow Wench
-Gutted UFP coupler so you don't have to look at the gaybob top handle styled ones
-4 bunk trailer with Custom, Carbon Fiber vinyl Fender Pads (also made by Carlos at Premier Marine Interiors)
This is the second to the last trailer Mike Livingston made while he was in CA and is quite literally "IRREPLACEABLE." If you're a purist you will know what that means.
To have this trailer built new at Schiada you are looking at Cubic Dollars..
Boat still needs to be rigged with jack plate, steering, and gas tank.
Marc (818)445-6715 Boat is located in Parker, AZ
Will sell less motor for 16k obo
Build Thread to see progression pics / quality of work, and incidental parts like Double drop through fins etc..
Islander Marine Website showcasing the work by them Gallery

2007 Macgregor 26M Sailboat Moto...
MacGregor 26M sailboat with 50hp...
2008 Macgregor 26M Used LCD
Fort Worth,TX,USA
2001 Macgregor 26X Used
Port Charlotte,FL,USA