1980 20' Mako (Restored, Suzuki 140, new electronics)

over 4 years ago
1980 20' Mako (Restored, Suzuki 140, new electronics)
Available on

1980 20 Mako was fully restored 3 years ago with hundreds of photographs documenting the entire process. We easily have $30k in this boat maybe more but we stopped keeping track for sanity reasons. Just about everything on this boat is custom while maintaining the classic Mako heritage.
I know I will forget things here. This has been a great boat and we get compliments everywhere we go. It will be hard to let this one go but the time has come.
Asking price is $19,750.
- Stringers and bulkheads are H80 divinycell closed cell foam which will never rot
- Deck is Okoume Marine Plywood
- Brand new 79 gallon aluminum fuel tank was installed and coated with coal tar epoxy before installation (to prevent pitting)
- Suzuki 140HP Four Stroke engine with 375 hours
- Seastar hydraulic steering system (July 2011)
- Garmin 4208 (Sept 2013)
- Garmin 19x NMEA 2000 GPS Antenna
- Garmin VHF 200 Marine Radio (June 2013)
- Garmin GSD 22 Sounder (June 2013)
- Airmar B60 Thru-hull transducer (July 2011)
- Fusion MS-IP600 radio w/Siruius radio activated (June 2013)
- Fusion MS-WR600C Wired Remote (Can access all ipod/FM/AM/Aux/Satellite radio content from this remote) (June 2013)
- NMEA 2000 Network (Suzuki 140 {fuel burn, RPM, fuel remaining in tank, engine trim level, voltage, hours, etc}, Garmin 4208, Garmin VHF 200 DSC enabled, Garmin 19x GPS Antenna)
- Lenco 12x12 trim tabs (April 2014)
- Jabsco Par-Max 4 raw water washdown pump (July 2011)
- Armstrong Marine 3 Step Dive Ladder
- Custom aluminum leaning post with foot rest and rocket launchers (July 2011)
- Lumitec SeaBlaze 3 Blue/White underwater lights
- 316 SS pop-up cleats all around
- 8 Shakespeare VHF antenna
- 600 gallon per hour x2 bilge pumps with automatic and manual mode (Nov 2013)
- 8 Rod holders total (4 on leaning post and 4 recessed in gunnels)
- All high quality 316 stainless steel thru hulls and fittings
- 13 Stainless Steel steering wheel with suicide knob
- BEP Marine 716-SQ-140A-DVSR - Battery Charging Cluster
- Brand new AGM batteries (June 2013)
- Pioneer Marine Speakers (2 x 6 and 2 x 8) (June 2013)
- Custom locking console door
- Custom locking glove boxes (plenty of dry storage room for cell phones, wallets, keys, etc.)
- Custom switch panel with dedicated switches for everything
- Most hatches/compartments are illuminated with LED lights
- Very detailed and labeled wiring
- 2009 Venture single axle trailer with new LED lights, springs, wheels, tires and hubs in 2013
- Full boat cover included as well as Suzuki engine cover
Here is a link to the album with the pictures below as well as a sample of the restoration pictures (there are hundreds more):