21' Raysoncraft V-Drive

over 1 year ago
21' Raysoncraft V-Drive
Price
$10,000.00
Brand
Sun Ray
Seller
StreetMoto
Available on
PerformanceBoats
Description

Hey guys,
I'm launching a real estate tech startup and need some funding so its time to start selling off the toys
I had big plans for this boat, but I need the money more than I need a water hot rod right now.
I have all the details below from the guy I purchased it from a couple years ago. The gel coat is original and in really good shape. There is only two small cracks on the entire boat and they're only in the gel coat (not structural). The original owner (notes below) stated it has hardly any time on it.
Per the previous owner, the 427, TH400 trans and casalle 500 heavy duty V-Drive have only a couple hours of run time since rebuild. The 427 is a 4 bolt is out of a 67 Corvette with 3904351 stamped on the block.
I took the motor out to get it ready for a blown 540 I built for it. The engine is back in the boat but needs a couple parts to get running again (mostly just fuel and water cooling lines), but it did run just fine when I first got it.
The main value is the hull. It really is in great shape, has beautiful lines and would be a great platform for a go-fast project. The trailer is fine structurally and has new tires but needs to be repainted. The interior needs to be replaced. I took some of it out to check the bilge and structure of the hull and everything is in good shape.
Ill be going to the boat show in Needles the weekend of Feb 27th. If someone is really interested and Needles is closer to them than Ventura County, I have no problem towing it out there.
Please txt or call if you have any questions, I dont check my PMs all that often. Thanks, Sean.
805.559.One Six Two Zero $10,000 firm.Notes from previous owner:everything on the boat is new, just rebuilt the carb. replaced all the bolts with stainless except a few, trans and vdrive has aprox 3 hours on it. All the steering, shaft log , and vdrive have new seals, one of the steering fins is bent a little and i just left it that way, fearing damage. All the steering, v drive, cavplate, shaft log, rudder , was set up by Ray Differ in phx in 1979 the boat was in the water maybe 30 times in its whole life. Also replaced. the throttle cable, shifter cable wood and carpet on the trailer and new lights and wires on the trailer.
bought the 427 chevy from a jet boat had a local machine shop that built our sprint car engine bore it, built the heads with all new everything, we put it together about ten years ago and the motor was wrapped in shrink wrap till now. All new seals on the steering, prop shaft, all the rubber on everything, has an electric trim motor from a plane for the cav plate rebuilt that.
Boat is turnkey , ready to go skiing, the only thing thats ruff is the trailer and its got new bunks lights and tires, only been in the water maybe 100 hours floating its whole life, its the original jell coat and never been raced or painted, or scratched. I think the gears are 21. I clocked it on my gps at 65mph at 5500 rpm but will turn 6500 rpm in third, the motor has new pistons ,valve, rockers, bore, oil pump, water pump, battery, trans just serviced with new cooler, and Casalle hd 500, has new seals, and oil, new water shaft log seal and bushing, new rudder bushing.

2003 Regal 2860 Commodore Used
$29500.0
Fort Myers,FL,USA
2003 Regal 2665 Commodore Used
$30990.0
Gulf Shores,AL,USA
2005 Regal 3060 Express Used
$60000.0
Pascagoula,MS,USA
1989 Regal Commodore 280 Used
$15900.0
Eden Prairie,MN,USA
FRESH WATER REGAL 4460 COMMODOR...
$169995.0
Osage Beach,MO,USA
1999 Regal Marine 2850
$12999.0
Middleburg,FL,USA