page 1 of 28 results
You searched for {{search.q}}. Create an alert
New Morse cables & AN fittings I have about 20 new Morse cables. Most have threaded ends. Different lengths. $20 each. New AN fittings, 50% off retail. (949)248-0083 or mvmracing@cox.net
$20.00
Forum: PerformanceBoats
New AN fittings from build I have some new XRP and Earl's fittings left over from a build. Most are AN-8, but there are a few AN-12 and AN-16 stuff. Check out ad under fittings for a complete list with prices. (949)248-0083 or mvmracing@cox.net
$83.00
Forum: PerformanceBoats
392 Hemi Rewarder zoomies w/baffles Chrome Rewarder zoomie headers for a early hemi (331/354/392) with baffles and water lines. $500 + shipping. (949)248-0083 or mvmracing@cox.net
$500.00
Forum: PerformanceBoats
Rewarder zoomie for 392 hemi Nice pair of chrome Rewarder zoomie headers with baffles and water lines for a early hemi (331/354/392). $500 + shipping. mvmracing@cox.net or (949)248-0083
$500.00
Forum: PerformanceBoats
Vintage Holley 3-barrel carb, 950 cfm Vintage Holley 3-barrel carburetor. It is rated at 950 cfm. It is dual feed, single pump with vacuum secondary. $200 + shipping. (949)248-0083 or mvmracing@cox.net
$200.00
Forum: PerformanceBoats
392 Chrysler hemi Rewarder zoomies w/baffles Rewarder chrome zoomies for a 392 Chrysler hemi. Pipes are 2.5" OD and come with 8 baffles. Set up for water lines. Chrome is in excellent condition. Pipes have a 1.25" wide support strap on both sides. $600 + shipping. (949)248-0083 or mvmracing@cox.net
$600.00
Forum: PerformanceBoats
New AN -8 fittings FREE SHIPPING 5 x 90* hose ends. $65 6 x 45* hose ends. $90 6 x straight female swivel couplers. $30 8 x straight hose ends. $50 All are AN -8 mvmracing@cox.net or (949)248-0083
$90.00
Forum: PerformanceBoats
AN fittings & hoses Used AN -12 hoses & fittings: overall length/fittings. 26/ST - one fitting only 18/ST/90 16/ST/ST 11/45/ST 8/ST/ST (2) 7/ST/ST 7 pieces $65 + shipping Used AN -10 hoses & fittings: 23/45/ST 22/45/ST 19/45/ST (2) 19/ST - one fitting only 18/ST - one fitting only 15/90/90 7...
$80.00
Forum: PerformanceBoats
Oberg filter $40 Oberg oill filter with screen and o-ring. $40 + shipping. (949)248-0083 or mvmracing@cox.net
$40.00
Forum: PerformanceBoats
460 mount, carb plate, scoop Nicson front cover and motor mount for a 429/460 Ford. Should work in a jet boat or v-drive. Holes are 1.75" apart top & bottom and 18" across. Part number is 300-20 FORD. finned and in nice shape. $150 Polished carb adapter for top of blower for 2 side-by-side Dominators. It has Childs & Albert...
$100.00
Hol
Forum: PerformanceBoats
BDS polished 8:71 w/snout-idler BDS polished 8:71 street or boat blower. 4" snout with 51 tooth 8mm pulley, idler bracket and 3" ID billet aluminum idler pulley. This was a display blower and needs a coupler for the snout. No Teflon. Unit is unused. $2000 + shipping. (949) 248-0083 or mvmracing@cox.net
$2,000.00
Forum: PerformanceBoats
Dooley scoop for 2 Dominators Polished Dooley scoop for 2 Dominator carbs. Spacing is 8.75" center-to-center. $75 mvmracing@cox.net or (949)248-0083
$75.00
Forum: PerformanceBoats
BBC tunnelram w/Enderle BugCatcher BBC Edelbrock Street Ram oval port manifold with an Enderle BugCatcher injector on the top. Commonly known as a "Top Hat". Plenty of material in the manifold to open it up for rectangular port heads. It has the adapter to put the injector on the tunnelram. The distribution block has been moved to...
$850.00
Forum: PerformanceBoats
6 steel braid hoses w/AN-8 fittings 6 short steel braid hoses with AN-8 fittings on both ends. Overall length and fitting combination. $100 1 x 16.5" with 90/90 3 x 13" with 90/ST (1 not pictured) 1 x 11" with 60/ST 1 x 10" with 60/ST mvmracing@cox.net or (949)248-0083
$100.00
Forum: PerformanceBoats
Crower .903" roller lifters MOPAR I have 2 sets of Crower severe duty roller lifters for a .903" lifter bore. They have the tie-bars attached and have the wide wheel. One set is standard (push-rod cup in the center on both lifters) and one set has the push-rod cup on the intake lifter off-set .180". They are $100 per set. mvmraci...
$100.00
Forum: PerformanceBoats
Polished Dooley-style scoop for 2 Doms Polished Dooley-style scoop for 2 Dominator carbs. Scoop is 28" long; 5.25" tall in front and 4" tall at the back; 12.5" wide at front and 8.75" at the rear. Holes for the carbs are 7.25" in diameter and the spacing is 8.75" center-to-center. Comes with mounting hardware (2 threaded rods, 2 big f...
$150.00
Hol
Forum: PerformanceBoats
2 polished burn-down breathers 2 polished aluminum burn-down breathers that usually mount to valve covers. Each one has a large male AN fitting to attach a hose to. Breathers are3.625" tall; 3.375" long by 1.875" wide (base) and the mounting holes are 2" center-to-center. $100 FREE SHIPPING to the lower 48 states.(949)248-008...
$100.00
Hol
Forum: PerformanceBoats
Magnesium Enderle BirdCatcher complete Magnesium Enderle BirdCatcher injector with a carbon wrap. I don't think there is a nicer one out there. Comes with K-valve and poppets, polished blades, distribution block, hard-lines, nozzle bodies, nozzles, all throttle-shaft hardware & linkage and 2 threaded plugs on the top for ease of bolti...
$1,250.00
Forum: PerformanceBoats
SBC Hilborn stack injector, no pump, $750 SBC Hilborn stack injector. No pump. 8.75" tall splayed and belled stacks, #14 nozzles, barrel valve and all lines and throttle-shaft linkage. $750. mvmracing@cox.net or (949)248-0083
$750.00
Forum: PerformanceBoats
DJ blower restraint DJ aluminum blower restraint with fireproof material on all straps. It was manufactured in August of 2013. The aluminum plate is .250" thick and will meet SFI Spec 14.2 The side straps are 24" long and the rear strap is 15" long. The opening is 12.625" by 4.375". Outside dimensions of the plate ...
$100.00
Forum: PerformanceBoats
New XRP AN-10 fittings I have 6 small boxes of new XRP AN-10 miscellaneous fittings and 1 box of AN-12 stuff. They are $100 box. That includes FREE SHIPPNG to the lower 48 states. (949)248-0083 or mvmracing@cox.net Package 1: (2 boxes) Includes 10 pieces. (3) straight hose ends, (2) female-to-female flare fittings, (1)...
$100.00
Forum: PerformanceBoats
Polished Enderle BuzzardCatcher blower inj... Polished Enderle BuzzardCatcher blower injector with red blades. Comes with K-valve, distribution block, stainless lines, nozzle bodies, nozzles (most in the 50's range), main fuel line and all throttle-shaft hardware and linkage. $800. mvmracing@cox.net or (949)248-0083
$800.00
Forum: PerformanceBoats
Polished wing w/struts 32x23 Polished aluminum wing. It is 736 sq. in. and measures 32" wide by 23" deep. Comes with chrome tubular struts. $200 + shipping. (949)248-0083 or mvmracing@cox.net
$200.00
Forum: PerformanceBoats
Subject Price Brand Price Found
1996 Stratos 2100 Center Console Honda 225 4 stroke Custo... $14,990.00 - 5 hours ago
New Morse cables & AN fittings $20.00 Other over 1 year ago
New AN fittings from build $83.00 Other almost 2 years ago
392 Hemi Rewarder zoomies w/baffles $500.00 Zoom almost 2 years ago
Rewarder zoomie for 392 hemi $500.00 Water about 2 years ago
Vintage Holley 3-barrel carb, 950 cfm $200.00 Other about 2 years ago
392 Chrysler hemi Rewarder zoomies w/baffles $600.00 Water about 2 years ago
New AN -8 fittings FREE SHIPPING $90.00 Other about 2 years ago
AN fittings & hoses $80.00 Other about 2 years ago
Oberg filter $40 $40.00 Other about 2 years ago
460 mount, carb plate, scoop $100.00 Hol over 2 years ago
BDS polished 8:71 w/snout-idler $2,000.00 Other over 2 years ago
Dooley scoop for 2 Dominators $75.00 Other over 2 years ago
BBC tunnelram w/Enderle BugCatcher $850.00 Other over 2 years ago
6 steel braid hoses w/AN-8 fittings $100.00 Other over 2 years ago
Crower .903" roller lifters MOPAR $100.00 Other over 2 years ago
Polished Dooley-style scoop for 2 Doms $150.00 Hol over 2 years ago
2 polished burn-down breathers $100.00 Hol over 2 years ago
Magnesium Enderle BirdCatcher complete $1,250.00 Other over 2 years ago
SBC Hilborn stack injector, no pump, $750 $750.00 Other over 2 years ago
DJ blower restraint $100.00 Other almost 3 years ago
New XRP AN-10 fittings $100.00 Lowe almost 3 years ago
Polished Enderle BuzzardCatcher blower injector $800.00 Other almost 3 years ago
Polished wing w/struts 32x23 $200.00 Other almost 3 years ago