Posted is a Pair (1 driver's side, 1 passenger side), used 94-04 Mustang Cobra/Mach 1 rear brake calipers with slide mounts. These are located in Springfield, VA. Asking $180/pair
This Cobra caliper is from a functioning 1998 Mustang Cobra and works with the 11.65" Cobra rotors. Great choice when doing the SN95 Cobra brake upgrade on the 79-1993 Mustang or upgrading to the thicker vented brakes on the 1994-2004 GT/V6 (when upgrading to Cobra specification brakes). This is a pair of rear calipers including mounting slide brackets and a pair of brake pads (for fit checks, verification, etc.). The mount slide brackets on these Cobra calipers provide proper clearance for the thicker Cobra Vented Rotors (Other slide mounts may not clear cobra rotors).
*For those upgrading to the Cobra style rotors from non-Cobra/Mach Mustangs you will likely need axle mounting brackets (to reposition the caliper) and the larger vented Cobra Rotors (and fresh Cobra brake pads). Do some research, I have done this with a new edge Mustang GT if you need advice.
*For those that aren't upgrading (yet) that have a Mustang GT, you can use these with standard Mustang GT brake pads (I have new ones available if needed, PN: MKD627).
These aren't included with this listing, but wanted to provide this information (if needed). Ford sold a kit to help adapt the use of rear Cobra vented rotors on a non-Cobra Mustang with an 8.8 rear. Ford Racing Performance Parts M-2300-M:
1 ADAPTER, CALIPER TO AXLE L.R. F4ZZ-2C101-B
1 ADAPTER, CALIPER TO AXLE R.R. F4ZZ-2C100-B
2 DUST SHIELD F4ZZ-2C028-A
6 BOLTS, DUST SHIELD N602726-S2
2 ROTOR, REAR F4ZZ-2C026-B
1 MOAN BRACE, R.R. F4ZZ-2C366-A
1 MOAN BRACE, L.R. F4ZZ-2C367-A
Images are of actual items (except for the comparison image).